Словена
 
 
Тел.: +7 (495) 304-3711, 304-0051, 304-0931 E-mail: info@slovena.ru
 
Продукция и услуги

 
 
 
 
 
 

 
 

 
 
 
 
 

 

 

 




Полиэтилен высокого давления
OF 2019

TIPOLEN OF 2019 is a low density polyethylene grade that does not contain any additives. It is suitable for injection moulding of general and complicated forms. TIPOLEN OF 2019 processes well and the products made of this grade have good mechanical properties. TIPOLEN OF 2019 is licensed by the National Food and Nutrition Institute and it has the internationally acknowledged FDA and BGA licenses for applications in the food industry.

Properties

Test metods

Unit

Value  

Density

ISO 1183

g/cm 3

0.920

Melt flow index (2.16 kg/190 C)

ISO 1133

g/10 min

20

Tensile strength

ISO 527

MPa

10

Elongation at break

ISO 527

%

550

Vicat softening temperature

ISO 306

C

90

Shore D hardness

ISO 868

 

44

•  MFI is measured at 190 C on a material flowing through a standard outlet of 2,095 under a load of 2.16 kg.
•  Mechanical properties are taken on a specimen prepared according to ISO 527-2 after the specimen is conditioned at room temperature (ISO 291).