Словена
 
 
Тел.: +7 (495) 304-3711, 304-0051, 304-0931 E-mail: info@slovena.ru
 
Продукция и услуги

 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 

 

 

 




Полиэтилен низкого давления BA 550-13
для выдувки и листовой экструзии

TIPELIN BA 550-13 is a high density polyethylene grade for blow mouldings. TIPELIN BA 550-13 shows good ESCR and chemical resistance, furthermore high rigidity. Recommended application: bottles and cans of maximum 30 litre capacity for non aggressive household chemicals, cosmetics and oils. For non-pressure resistant pipes. TIPELIN BA 550-13 is suitable for food contact. The product complies with FDA, BgVV and EU norms.

Properties

Standard method

Unit

Value

Density:

ISO 1183

g/cm 3

0.955

Melt flow rate (190 C/2.16 kg)

ISO 1133

g/10 min.

0.3-0.4

Tensile strength at Yield

ISO 527

MPa

28

Elongation at Break

ISO 527

%

>1200

Flexural modulus

ISO 178

MPa

1250

ESCR (F 50 B method)

ASTM D 1693

h

45

Vicat softening temperature

ISO 306

C

129

•  MFI measured at 190 C under a load of 2.16 kg with standard nozzle having a diameter of 2.095 mm.
•  Average mechanical property values of several measurements carried out on standard specimens (ISO 293) conditioned at room temperature (ISO 291).