Словена
 
 
Тел.: +7 (495) 304-3711, 304-0051, 304-0931 E-mail: info@slovena.ru
 
Продукция и услуги

 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 

 

 

 




Полиэтилен низкого давления 8000 F
для выдувки и листовой экструзии

Description

TIPELIN 8000 F is a high density polyethylene film grade, which combines superior physical properties with excellent processability. Due to high densi-ty, the material properties are best utilised by processing at HDPE condi-tions. Film made of TIPELIN 8000 F has good strength, high stiffness, impact and balanced tear resistance. TIPELIN 8000 F contains antioxidant.

Applications

TIPELIN 8000 F is particularly suitable for applications where outstanding and well balanced mechanical properties and good draw down together with high stiffness are required, such as produce bags, industrial liners, carrier bags and heavy duty bags. TIPELIN 8000 F is suitable for food contact. The product complies to Food Contact Regulations

Physical Properties

Properties

Test method

Unit

Typical Value*

Density

ISO 1183

g/cm 3

0.947

MFR (190 ° C/5.0 kg)

ISO 1133

g/10min.

0.2

MFR (190 ° C/21.6 kg)

ISO 1133

g/10min.

6

Melting Temperature

ISO 11357/03

° C

130

Vicat softening Temperature - A

ISO 306

° C

124

* Data should not be used for specification work.

Processing

TIPELIN 8000 F is intended for high neck extrusion on HDPE film extruders. The material will provide optimal performance in extrusion and in mechanical properties.

Recommended extrusion conditions are

Flat temperature profile with a melt temperature between 210 and 230 ° C. Neck height 5-8 x die diameter Blow up ratio 3:1 – 5:1

Film Properties **

Properties

Test method

Unit

Typical Value*

Tensile strength MD/TD

ISO 527-3

MPa

50/55

Tensile Strain at Break MD/TD

ISO 527-3

%

250/300

Tensile Modulus (0.05-1.05%) MD/TD

ASTM D 882-a

MPa

1000/1100

Dart Drop

ISO 7765/1

g

350

Elmendorf Tear Strength MD/TD

ISO 6383/2

N

0.2/0.3

* Data should not be used for specification work.
** Film properties are measured on a 15 µm film sample produced in a O65 mm
Alpine extruder, die 160x1.5mm, BUR=4:1, neck=8xdie diameter MD=Machine Direction, TD= Transverse Direction .

Storage and Handling

TIPELIN 8000 F should be stored in dry conditions at temperatures below +50 ° C and protected from UV light. Improper storage can initiate degradation, which results in odour generation and colour changes and can have negative effects on the physical proper-ties of the product. The TIPELIN 8000 F should be protected from contact with direct flames and other ignition sources.

Safety

See MSDS.

Recycling

The product is suitable for recycling using modern methods of shredding and cleaning. In-house production waste should be kept clean to facilitate direct recycling.

Notes

The information provided in this publication has been complied to the best of our present knowledge. However, in view of the various applications of polyethylene resins and the equipment used, the processing conditions may differ. The recommendations and data herein are to be construed as informatory only and do not relieve users from carrying out their own tests and experiments prior to processing in order to check suitability for a specific use. It is the responsibility of those to whom we supply our products to ensure that any proprietary rights and existing laws and legislation are observed. Our products are under continuous development, therefore we reserve the right to change the information presented in this brochure at our own discretion.