* Data should not be used for specification work.
TIPELIN 6000 B is easy to extrude and can be used in all conventional blow-moulding machines. Recommended processing temperature 170-200 ° C .
Barrel: 170-190 ° C
Storage and Handling
TIPELIN 6000 B should be stored in dry conditions at temperatures below +50 ° C and protected from UV light. Improper storage can initiate degradation, which results in odour generation and colour changes and can have negative effects on the physical properties of the product. TIPELIN 6000 B should be protected from contact with direct flames and other ignition sources.
The product is suitable for recycling using modern methods of shredding and cleaning. In-house production waste should be kept clean to facilitate direct recycling.
The information provided in this publication has been complied to the best of our present knowledge. However, in view of the various applications of polyethylene resins and the equipment used, the processing conditions may differ. The recommendations and data herein are to be construed as informatory only and do not relieve users from carrying out their own tests and experiments prior to processing in order to check suitability for a specific use. It is the responsibility of those to whom we supply our products to ensure that any proprietary rights and existing laws and legisla-tion are observed. Our products are under continuous development, therefore we reserve the right to change the information presented in this brochure at our own discretion.